Page 13 - A-series
P. 13
Design and technical characteristics
A-Series screw oil-filled compressors produce industrial compressed air, optionally with refrigerated dryer, up to
class 4-4-4 to ISO 8573-1:2010.
New compressor design: Professional controller (A), effective and reliable electric motor (B), screw air-end
Rotorcomp Verdichter (C), effective separation system (D).
Professional controller i-Log (A)
The professional controller i-Log controls A
operation of the compressor in automatic
mode, and also provides the user with
necessary information on the working B C
pressure, temperature of the air oil mixture,
compressor’s operation time, need for
servicing, etc.
The professional controller allows a group
mode control via several i-Log controllers
and connection to a higher-level master
controller or a control room via MODBUS.
D
Reliable electric motor (B) Screw air-end (C) Separation system (D)
A-Series compressors are fitted with The air-end has a contemporary energy- A-Series compressors are fitted with an
quality electric motors with a high efficiency efficient screw shape. effective three-phase separation system.
coefficient and world-class bearings from This increases compressor efficiency and Most of the oil is separated under centrifugal
leading manufacturers. reduces maintenance and replacement force in the separator tank. Some of the oil
The motors are not overloaded, but have a costs. is separated by gravitational force during
power reserve and overheat protection for movement of oil inside the separator.
windings. The remaining amount of oil is separated
by a quality separation element. The total
amount of oil in compressed air at the outlet
of the compressor does not exceed 3 mg/m³.
www.comprag.com STATIONARY SCREW COMPRESSORS A-SERIES 13