Compressed Air Aftercoolers

Portable compressed air aftercoolers
ACP / ACE

Technical data

Max. working pressure: 12 bar
Capacity: 20 / 30 / 45 m3/min
Voltage: 400V/ 3Ph /50 Hz
Power: 0,3 / 0,7 / 0,9 kW
Pressure of air motor min/max: 2 / 6 bar
Consumption of compressed air with min/max pressure of air motor: 0,6 / 1,4 m3/min

More »

ACP/ACE aftercoolers of compressed air remove condensate and oil from the air stream during abrasive blast cleaning. Condensate and oils in the abrasive blast cleaning system lead to the caking of abrasive material and potential blocking of the metering valves, hoses and nozzles. Dry and cleaned compressed air prevents caking of abrasive material, increases performance and reduces maintenance costs. ACP/ACE coolers of compressed air are an efficient means of removing up to 95% of condensate and oil which are commonly present in compressed air. Dry air prevents moist abrasive material, which would lead to increased wear, downtime and extra servicing.

Application

Abrasive blast cleaning, paint spraying with a pneuamtic drive, guniting, and construction and road works using pneumatic tools.

Designed for operation

With any brand of portable and stationary screw compressor unit. Compressed air flowing from a diesel compressor has a high temperature of approximately 90°C. At such a temperature, compressed air contains a large amount of moisture in the form of steam vapour. If an aftercooler and cyclone condensate separator are not used, compressed air can add up to 21.5 litres of water per hour into the system with a compressor operating at 5.7 m3/min capacity and a pressure of 7 bar. ACP/ACE aftercoolers of compress air cool compressed air to a temperature 3° C - 10° C higher than the ambient temperature. Once the air is cooled, vapour moisture condenses and up to 95% of condensed moisture may be eliminated from the system.

Functional characteristics

Portable design; pneumatic or electric drive; efficient cyclone separator; distributing header to three or four ball valves; pressure controller / filter / lubricator (ACP); contactor starter in sealed casing (ACE); inflated wheels.

The ACP aftercooler
Is fitted with a pressure controller for controlling the air flow of the fan, and a filter and a lubricator to ensure the long service life of the pneuamtic drive.
The ACE aftercooler
Is fitted with a contactor starter with dampproof and dust-proof casing.
ACP/ACE aftercoolers
Are fitted with an efficient cyclone separator capable of eliminating up to 95% of condensed moisture from compressed air.

Downloads

Catalogue
Download
User manual
Download
Copyright © 2002- Contracor ®